MD-GYJ-100C laboratory roller press

一、Overview:

The model roller press is specially designed for the small-scale lithium electrode sheet rolling process. It uses a single 220V power supply and is suitable for use in the test lines of universities and enterprises. The heated pair-roll mill is specially designed for material researchers. It is suitable for manual rolling of battery materials in the laboratory, a small amount of precious metal materials such as gold and silver, and non-ferrous materials such as copper and aluminum. The rolling thickness is adjustable and the operation is simple. Particularly suitable for thinning and increasing the density of lithium battery pole plates of clean energy materials.

二、Equipment workflow:

l  This equipment is composed of front roller, rear roller, operating hand wheel, speed regulating motor and other parts.

l  Turn the hand wheel manually to make the upper roller produce downward pressure, and flatten the battery pole pieces placed on the lower roller.

l  This equipment is driven by a geared motor to drive a high-hardness pressing roller, and the gap between the pressing rollers is mechanically adjusted, so that the pole piece is formed under pressure and the density of the pole piece is increased.

l  Environmental conditions: The installation environment temperature of this equipment should be controlled below -20℃-60℃, and the installation site should be well ventilated and have good heat dissipation conditions.

三、Technical Parameters

五、The main components of the equipment:

1.       Motor (Taiwan Aideli)

2.       Bearing 6205 (SKF Sweden)

3.       Digital dial indicator (Guangxi system)

4.       The main material 45# trump card (plating treatment)

5.       Steel roller material imported 9CR2M