MD-GYJ-100D electric horizontal desktop heating roller press

MD-GYJ-100D electric horizontal desktop heating roller press

一、Overview:

This type of roller press is specially used for electric rolling of small lithium electrode sheets, a small amount of precious metal materials such as gold and silver, and non-ferrous materials such as copper and aluminum. It is especially suitable for thinning and increasing the density of lithium battery pole plates of clean energy materials. This machine adopts gear transmission, realizes double-roll pressing, the rolling thickness can be adjusted, it is convenient to use, and it can realize the intuitive control of the material pressing thickness with a dial indicator.

二、Working principle:

This equipment is driven by a geared motor to drive a high-hardness pressing roller, and the gap between the pressing rollers is mechanically adjusted, so that the pole piece is formed under pressure and the density of the pole piece is increased.

三、Technical Parameters:

1. Pressure roller size: Φ100mm×200mm;

2. Surface hardness of pressure roller: HRC62; steel roller material imported 9CR2MO

3. Roll cylindricity: ≤±0.002mm;

4. Effective clearance: 0-3mm adjustable;

5. Working speed: stepless speed change, linear speed 0-4m/min adjustable;

6. Roll surface finish:; hard chrome plating will never rust.

7. Working width: up to 200mm;

8. Roll surface quenching depth: 5mm;

9. Maximum pressure: 5T;

10. Working power: 2.4KW, temperature ~130℃

11. Voltage: AC 220V.

12. The reducer motor adopts the Yutian (Japan) joint venture brand motor.

11. Overall size: 800mm (length) × 320mm (width) × 320mm (height);

12. Approximate weight: 110KG

13. Equipped with two digital dial indicators

14. The rolls are placed horizontally.