MD-GYJ-100B laboratory electric roller press

一、Overview:

This type of roller press is specially used for electric rolling of small lithium electrode sheets, a small amount of precious metal materials such as gold and silver, and non-ferrous materials such as copper and aluminum. It is especially suitable for thinning and increasing the density of lithium battery pole plates of clean energy materials. This machine adopts gear transmission, realizes the roll pressing, the rolling thickness can be adjusted, it is easy to use, and it can realize the intuitive control of the material pressing thickness with the dial indicator.

二、Working principle:

This equipment is driven by a geared motor to drive a high-hardness pressing roller, and the gap between the pressing rollers is mechanically adjusted, so that the pole piece is formed under pressure and the density of the pole piece is increased.

三、Technical parameter

1. Roller size: Φ100mm×200mm;

2. Surface hardness of pressure roller: HRC62; steel roller material imported 9CR2MO

3. Roll cylindricity: ≤±0.002mm;

4. Effective clearance: 0-5mm adjustable;

5. Working speed: step less speed change, linear speed 0-6m/min adjustable;

6.Roll surface finish:;hard chrome plating will never rust.

7. Working width: up to 200mm;

8. Roll surface quenching depth: 5mm;

9. Maximum pressure: 5T;

10. Working power: 200W;

11. Voltage: AC 220V;

12. The reducer motor adopts Yutian (Japan) joint venture brand motor;

13. Machine size: 700mm (length) × 320mm (width) × 320mm (height);

14. Approximate weight: 95KG.