Professional battery testing equipment:
Three key technologies:
1. Energy saving: comprehensive energy saving of more than 70%, high-power inverter technology
2. High efficiency: labor efficiency increased by 50%
3. High quality: accuracy deviation <0.5% after 500 consecutive charging and discharging, high precision and stable detection technology
Product stability: Single-point independent constant current and constant voltage power supply, complete protection functions, stable operation, selected materials, fine craftsmanship, higher service life than peers, and fast inspection speed.
Technical excellence: The feeder-type energy-saving mode design is adopted, which has high energy-saving efficiency, flexibility, and humanized intelligent operation. The product linearity, accuracy and speed have reached high standards, and the maintenance and upgrades are good for expansion.
Accuracy: Each battery fixture is designed with the internationally popular four-wire principle, which avoids the superimposition of the internal resistance of the tester on the internal resistance of the battery and makes the test results more accurate.
Flexible: When the battery under test has low voltage, undercurrent, overvoltage, or overcurrent, the control system will close this channel and separate the battery from the device.
Cost-effective: rich experience, strong technology, professional management team, wide range of product use and praise from customers, the performance indicators and product quality of similar products have the most cost-effective advantages.
7*24 hours after-sales service: The product is guaranteed for one year, free of charge and careful technology.
Energy-saving battery based on high-frequency power feedback technology
The working principle of chemical composition equipment:
Charging mode: PWM switching power supply mode is adopted to realize constant current and constant voltage charging of the battery.
Advantages: high power conversion efficiency, generally above 85%.
Energy-saving charging mode (switching power supply mode)
Discharge mode: First, the voltage of the battery is increased by the PWM boost circuit and sent to the inverter power supply, and then gradually increased to be converted into AC power and sent to the AC grid, and finally the battery discharge power is fed back and reused.
Advantages: The discharged electric energy of the power supply is well recycled and reused, and the energy saving effect is obvious.
|
model |
MDSC- S16-64-30 |
MDSC- S15-64-30 |
MDSC- S16-94-20 |
|
|
|
|
|
|
Device channel number |
The whole machine has 64 channels |
The whole machine has 64 channels |
The whole machine has 512 channels |
|
Dimensions |
1895mm×900mm×1840mm |
1680mm×930mm×1840mm |
1850mm×900mm×1840mm |
|
Chassis color |
标配米白色(可定制) |
||
|
Fixture form |
下压式 |
端子排+鳄鱼夹 |
下压式 |
|
Fixture spacing |
40-155mm |
150mm |
40-155mm |
|
Support battery specifications |
方形，高110-220mm，厚15-75mm，宽65-220mm |
聚合物电池、方形电池（带极耳） |
方形，高110-220mm，厚15-75mm，宽65-220mm |
|
Power supply |
三相五线制AC380V±10%，50HZ |
||
|
Working power consumption |
≤16KW |
≤16KW |
≤16KW |
|
working environment |
温度0～40℃,相对湿度≤80% |
||
|
Cooling method |
自然进风,向上排风 |
||
通道参数：
|
model |
MDSC- S16-64-30 |
MDSC- S15-64-30 |
MDSC- S16-94-20 |
|
|
|
|
|
|
Voltage measurement range |
0～5V |
||
|
Battery voltage range |
Charge 0～4.5V; Discharge 4.5～2V |
||
|
Constant voltage range |
2.5～4.5V |
||
|
Voltage accuracy |
±(1‰ reading+1‰ full scale) |
||
|
Voltage resolution |
1mV |
||
|
Voltage stability |
≤1‰ |
||
|
Current range |
Charge 200mA～20A Discharge200mA～20A |
Charge300mA～30A Discharge 300mA～30A |
Charge 200mA～20A Discharge 200mA～20A |
|
Current accuracy |
±(1‰读数+1‰满度) |
||
|
Current resolution |
10mA |
||
|
Stable current |
≤1‰ |
||
软件功能：
|
model |
MDSC- S16-64-30 |
MDSC- S15-64-30 |
MDSC- S16-94-20 |
|
|
|
|
|
|
way to control |
The software is installed on the computer to connect to the equipment, and the whole cabinet is controlled |
||
|
communication method |
Serial port, baud rate 57600 |
||
|
Process settings |
Up to 32 steps and 256 cycles can be set |
||
|
Charging mode |
Constant current, constant voltage, constant current and constant voltage |
||
|
Charging cut-off condition |
Voltage, current, time, capacity |
||
|
Discharge mode |
Constant current |
||
|
Discharge cut-off condition |
Voltage, time, capacity |
||
|
Protective function |
Overvoltage, undervoltage, overcurrent, undercurrent, overcapacity protection, power failure protection, data breakpoint recovery |
||
|
time limit |
Arbitrarily set within 0～30000 minutes, the time unit is min |
||
|
Time accuracy |
≤±1‰ |
||
|
Sampling inspection cycle |
≤3s |
||
|
Minimum data recording frequency |
≤5s |
||
|
Battery sorting |
Sort by (capacity, time, open circuit voltage, discharge platform, etc.) |
||
|
data processing |
Can record voltage, current, time, capacity and other data, automatically calculate constant current charge ratio, capacity loss, discharge efficiency, average voltage, median voltage and other data, provide data graphs and cycle diagrams; can output generated text, EXCEL, WORD Or MDB database format file |
||
联系人：胡顺语
手机：0086-15813334038
电话：020-84789496
邮箱：md@minder-hightech.com
地址： 广州市番禺区大龙街市新路新水坑段43号813
